Anchoring options for storage buildings

Option 1 – Concrete foundation

This option is for a permanently installed building. Concrete foundation (not included) has to be prepared according to our drawings (included). Base rail of building is bolted with concrete throughbolts M12x180/055 (included).

Option 2 – Concrete slab elements

This option is for permanent construction as well. Construct a sandbed of 45 cm (to the frost line) whereupon a spacious floor of the prefab concrete panels 200 x 200 x 16 cm (concrete slab elements) will be placed. The soil profiles of the storage building will then be anchored with drill anchors M12x180/055 (included).

This option is economical and faster.

Option 3 – Earth anchors

This option is for temporary or semi-permanent installation. For this purpose 1100 x ∅25 mm galvanized ground pegs may be ordered with us. Anchoring with these ground pegs can be done on pavement, asphalt or hard gravel. The installation surface has to be even with a maximum slope of 1cm/m1 limited to one direction. A curved surface requires equalization which leads to additional costs! Base rail holes of ∅30 mm are to be drilled on-site. An adequate holesaw is included). Installation with earth anchors saves time and money and is very suitable when only temporary construction is required or permitted.

This option is economical and faster.